UNIVERSITY of GLASGOW

Mechanical Engineering

Dr Philip Harrison BSc(Hons) PhD CEng MIMechE

Citation data: ResearchID | Google Scholar


PUBLICATIONS


Book Chapters

  1. Harrison, P., Yu, W.R. and Long, A.C. In Non-crimp fabric composites: manufacturing, properties and applications. Chapter 9, Modelling the deformability of non-crimp fabrics. ed. S. Lomov., Woodhouse Publishing Ltd. Cambridge, UK, 2010 [buy]
  2. Harrison, P. and Clifford, M.J. In Design and manufacture of textile composites, Chapter 4, Rheological behaviour of pre-impregnated textiles. ed. Long, A.C., Woodhead Publishing Ltd., Cambridge, UK,  2005   [buy]
  3. Harrison, P. and Maltman, A.J. Numerical modelling of reverse density structures in soft non-Newtonian sediments, from Van Rensbergen, P., Hillis, R.R., Maltman, A.J. and Morley, C.K. Subsurface Sediment Mobilisation, Geological Society, London, Special Publications, 216, 35-50, 2003 [pdf]  [buy]

Journal Papers

  1. Harrison, P., Normalisation of Biaxial Bias Extension Test Results Considering Shear Tension Coupling, Composites: Part A, 43, 9, 1546-1554, 2012 
  2. Abdiwi, F., Harrison, P. , Koyama, I., Yu, W.R., Long, A.C. Corriea N. and Guo, Z. Characterising and Modelling Variability of Tow Orientation in Engineering Fabrics and Textile Composites, Composites Science and Technology, 72, 9, 1034-1041, 2012
  3. Harrison, P., Abdiwi, F.  Guo Z., Potluri P. and Yu W.R., Characterising the Shear-Tension Coupling and Wrinkling Behaviour of Woven Engineering Fabrics, Composites: Part A, 43, 6, 903-914, 2012 
  4. Jebur, Q.H., Harrison, P., Guo, Z., Schubert, G., Ju, X. and Navez, V. Characterisation and modelling of a transversely isotropic melt-extruded LDPE closed cell foam under uniaxial compression, Proceedings of the Institution of Mechanical Engineers, Part C, 226(9), 2168-2177, 2012
  5. Harrison, P., Yu, W.R. and Long, A.C. Rate Dependent Modelling of the Forming of Viscous Textile Composites, Composites: Part A, 42,  1719–1726, 2011
  6. Carassiti, L., Jones, A., Harrison, P., Dobson, P., Kingman, S. W., MacLaren, I. and Gregory, D. Ultra-rapid, sustainable processing of silicon carbide powders and nanomaterials via microwave heating in air, Energy & Environmental Science, 4, 1503, 2011 [pdf]
  7. Harrison, P. ten Thije, R., Akkerman, R., Long, A.C. Characterisation and modelling friction at the tool-ply interface for thermoplastic woven composites, World Journal of Engineering, (7.1), 5-22, 2010 [pdf]
  8. Schubert, G., Guo, Z., Harrison, P. A Simple 2D Hyperelastic Model for Textile Composites. World Journal of Engineering, (7.1), 120-122, 2010
  9. Kim, K.J., Yu, W.R. and Harrison, P. Optimum consolidation of self-reinforced polypropylene composite and its time dependent deformation behaviour, Composites Part A, 39, 1597-1605, 2008 [pdf]
  10. Harrison, P., Wiggers, J. and Long, A.C. Normalisation of shear test data for rate-independent compressible fabrics. Journal of Composite Materials, 42, 22, 2315-2343, 2008   [pdf]
  11. Cao, J., Akkerman, R., Boisse, P., Chen, J., Cheng, H.S., de Graaf, E.F., Gorczyca, J.L., Harrison, P., Hivet, G., Launay, J., Lee, W., Liu, L., Lomov, S.V., Long, A.C., de Luycker, E., Morestin, F., Padvoiskis, J., Peng, X.Q., Sherwood, J., Stoilova, Tz., Tao, X.M., Verpoest, I., Williams, A., Wiggers, J., Yu, T.X. and Zhu, B. Characterization of Mechanical Behavior of Woven Fabrics: Experimental Methods and Benchmark Results, Composites Part A, 39, 6, 1037-1053, 2008   [pdf]    
  12. Lin, H, Wang, J., Long, A.C., Clifford, M.J. and Harrison, P. Predictive Modelling for Optimisation of Textile Composite Forming, Composites Science and Technology, 67, 3242-3252, 2007 [pdf]
  13. Wong, C.C., Long, A.C., Sherburn, M., Robitaille, F., Harrison, P. and Rudd, C.D. Comparisons of novel and efficient approaches for permeability prediction based on the fabric architecture, Composites Part A, 37, 847-857, 2006 [pdf]
  14. Harrison, P., Yu, W.R., Wang, .J., Long, A.C. and Clifford, M.J. A Predictive Approach to Simulating the Forming of Viscous Textile Composites, European Finite Element Revue, 14, 6-7, 613-631, 2005 [pdf]
  15. Yu, W.R., Harrison P. and Long A.C. Finite Element Forming Simulation for Non-crimp Fabrics using a Non-Orthogonal Constitutive Equation,  Composites Part A, 36, 1079-1093, 2005 [pdf]
  16. Harrison, P., Clifford, M.J., Long, A.C. Shear characterisation of woven textile composites: a comparison between picture frame and bias extension experiments,  Composites Science and Technology, 64, 10-11, 1453-1465, 2004 [pdf]
  17. Harrison, P., Clifford, M.J., Long, A.C. and Rudd, C.D. A constituent-based predictive approach to modelling the rheology of viscous textile composites,  Composites: Part A, 38, 7-8, 915-931, 2004 [pdf]
  18. Garcia Gil R., Long A. C., Clifford M. J. and Harrison P., Isothermal consolidation modelling for a glass / polypropylene commingled composite, Plastics, Rubber and Composites, 32, 2, 47-56, 2003 [pdf]
  19. Harrison, P., Clifford, M.J., Long, A.C. and Rudd, C.D. Constitutive modelling of impregnated continuous fibre reinforced composites: a micro-mechanical approach, Plastics, Rubber and Composites, 2, 31, 76-86, 2002 [pdf]
  20. Harrison, P., Janssen, L.J.P., Navez, V., Peters G.W.M. and Baaijens, F.P.T. Birefringence measurements on polymer melts in an axisymmetric flowcell, Rheologica Acta, 41, 114-133, 2002 [pdf]
  21. Harrison, P. and Navard P., Investigation of the Band Texture Occurring in Hydroxypropylcelullose Solutions Using Rheo-Optical, Rheological and Light Scattering Techniques, Rheologica Acta, 38, 569-593, 1999
  22. Harrison, P., Navard P. and Cidade, M.T., Investigation of the Band Texture Occurring in Acetoxypropylcelullose Thermotropic Polymer Using Rheo-Optical, Rheological and Light Scattering Techniques, Rheologica Acta, 38, 594-605, 1999   


Conference Papers (presenting author underlined)

  1. Harrison, P., Normalisation of Biaxial Bias-Extension Test Results Considering Shear-Tension Coupling, ESCM 2012 - 8th European Solid Mechanics Conference, Graz, Austria, 9-13 July, 2012 [pdf]
  2. Schubert, G., Harrison, P. & Guo, Z., Compression and Tension Tests of Magneto-Rheological Elastomers Magneto-Rheological Effect under Large Strains, ESCM 2012 - 8th European Solid Mechanics Conference, Graz, Austria, 9-13 July, 2012 [pdf]
  3. Jebur, Q.H., Harrison, P. & Guo, Z., Predicting the Transversely Isotropic Behaviour of Closed-Cell Foam Subjected to Compressive Loading, ESCM 2012 - 8th European Solid Mechanics Conference, Graz, Austria, 9-13 July, 2012 [pdf]
  4. Guo, Z., Shi, X., Peng, X. & Harrison, P., A Hyperelastic Model for Incompressible Particle-Reinforced Neo-Hookean Composite, ESCM 2012 - 8th European Solid Mechanics Conference, Graz, Austria, 9-13 July, 2012 [pdf]
  5. Alsayednoor, J., Harrison, P. & Guo, Z., Effect of Contact and Boundary Conditions on the Large Strain Compression of Random Cellular Structures, ESCM 2012 - 8th European Solid Mechanics Conference, Graz, Austria, 9-13 July, 2012 [pdf]
  6. Abdiwi, F., Harrison, P., Yu, W.R. & Guo, Z., Modelling the Shear-Tension Coupling of Engineering Fabrics, ESCM 2012 - 8th European Solid Mechanics Conference, Graz, Austria, 9-13 July, 2012 [pdf]
  7. Biglari, A., Harrison, P. & Guo, Z., Flexibility Based Beam Element Based On Large Increment Method, ESCM 2012 - 8th European Solid Mechanics Conference, Graz, Austria, 9-13 July, 2012 [pdf]
  8. Harrison, P. Gomes, R. Correia, N. Abdiwi F. and Yu, W.R. Press Forming the Double-Dome Benchmark Geometry using a 0/90 Uniaxial Cross-Ply Advanced Thermoplastic Composite, ECCM15 - 15th European Conference On Composite Materials, Venice, Italy, 24th -28th June, 2012 [pdf]
  9. Biglari, A.F., Harrison, P., Guo, Z., and Bicanic, N. A 2D Euler-Bernoulli inelastic beam-column element for the large increment method. 20th UK Conference of the Association for Computational Mechanics, 27-28 Mar 2012, Manchester, UK [pdf]
  10. Jebur, Q.F., Harrrison, P., Guo, Z., Schubert, G., & Navez, V., Characterisation and Modelling of a Melt-Extruded LDPE Closed Cell Foam, International Conference on Advances in Experimental Mechanics: Integrating Simulation and Experimentation for Validation (ISEV), 7th-9th September, Edinburgh, UK, 2011, published in Applied Mechanics and Materials, 70, 105-110, 2011 [pdf]
  11. Park, H., Yu, W.R., Harrison P. & Guo Z. Analysis Of The Mechanical Behaviour Of Magneto Shape Memory Polymers Under Magnetic Field, 18th International Conference of Composite Materials, 21st-26th August, Jeju Island, Korea, 2011 [pdf]
  12. Shi, X., Guo, Z., Peng, X. & Harrison, P. Numerical Homogenisation of Particle-Reinforced Neo-Hookean Composite, 18th International Conference of Composite Materials, 21st-26th August, Jeju Island, Korea, 2011 [pdf]
  13. Abdiwi, F., Harrison, P., Koyama, I., Yu, W.R., Long, A.C., and Guo, Z. Modelling Variability of Tow Orientation for Woven Textile Composites, 18th International Conference of Composite Materials, 21st-26th August, Jeju Island, Korea, 2011 [pdf]
  14. Abdiwi, F., Harrison, P., Guo, Z., Potluri, P. & Yu, W.R., Measuring the Shear-Tension Coupling of Engineering Fabrics, 14th International ESAFORM Conference on Materials Forming, 27th-29th April, Belfast, UK, 2011 [pdf]
  15. Alsayednoor, J., Harrison, P. and Guo, Z. Effect of Rotational Constraints on 2D Beam-Based RVE for Foam, 4th International Conference on Computational Mechanics,  19th-21st November, Zhangjiajie, Hunan Province, China, 2010 [pdf]
  16. Peng XQ, Guo ZY, Zia-Ur-Rehman and Harrison P A Simple Anisotropic Fiber Reinforced Hyperelastic Constitutive Model For Woven Composite Fabrics, 13th International ESAFORM Conference on Materials Forming, 7th - 9th April, Brescia, Italy, 2010 published in International Journal of Material Forming, 3, 1, 723-726, 2010  [pdf]
  17. Harrison, P. and Potluri P. Shear tension coupling in biaxial bias extension tests. 17th International Conference on Composite Materials, 27th-31st July, Edinburgh, Scotland, 2009 [pdf]
  18. Harrison, P. ten Thije, R., Akkerman, R., Long, A.C. Characterisation and modelling friction at the tool-ply interface for thermoplastic woven composites. NATO Advanced Research Workshop: Use of Textile Composites Technology for Safer Vehicles. Kiev, Ukraine, 18-21 May, 2009 [pdf]
  19. Schubert, G., Guo, Z., Harrison, P. A Simple 2D Hyperelastic Model for Textile Composites. NATO Advanced Research Workshop: Use of Textile Composites Technology for Safer Vehicles. Kiev, Ukraine, 18-21 May, 2009 [pdf]
  20. Harrison, P., Potluri, P., Bandara, K. and Long, A.C. A Normalisation Procedure for Biaxial Bias Extension Tests. 11th International ESAFORM Conference on Materials Forming, 23rd - 25th April, Lyon, France, 2008 [pdf] published in International Journal of Material Forming, 1, 1, 863-866, 2008  [pdf]  
  21. Willems, A., Lomov, S.V., Verpoest, I., Vandepitte, D., Harrison, P. and Yu, W.R. Forming simulation of a thermoplastic commingled woven textile on a double dome. 11th International ESAFORM Conference on Materials Forming, 23rd - 25th April, Lyon, France, 2008 [pdf] published in International Journal of Material Forming, 1, 1, 965-968, 2008 [pdf]
  22. Kim, K.J., Yu, W.R., Harrison, P., Hong, S.J., Lee, B.S. and Park, H.D. Optimum Consolidation of Self-Reinforcing Composite and its Time Dependent Deformation, 16th International Conference on Composite Materials, 8th-13th July, Kyoto, Japan, 2007 [pdf] 
  23. Harrison, P., Lin, H., Ubbink, M., Akkerman, R., van de Haar, K., Long, A.C. Characterising and Modelling Tool-Ply Friction of Viscous Textile Composites’, 16th International Conference on Composite Materials, 8th-13th July, Kyoto, Japan, 2007 [pdf]
  24. Harrison, P., Wiggers, J. and Long, A.C. Normalisation of Shear Test Data for Rate-Independent Compressible Fabrics, 10th International ESAFORM Conference on Materials Forming, 18th-20th April, Zaragosa, Spain, 1011-1016, (Key note lecture), 2007 [pdf]    
  25. Lin, H., Long, A.C., Clifford, M.J., Wang, J. and Harrison, P. Predictive Modelling of FE Forming to Determine Optimum Processing Conditions, 10th International ESAFORM Conference on Materials Forming, 18th-20th April, Zaragosa, Spain, 1092-1097, 2007 [pdf]
  26. Harrison, P., Long, A.C., Yu, W.R. and Clifford, M.J. Investigating the Performance of Two Different Constitutive Models for Viscous Textile Composites, 8th International Conference on Textile Composites (TEXCOMP), 16th-18th October, Nottingham, UK, 2006 [pdf] 
  27. Lin, H., Harrison, P., Van de Haar, K., Wang, J., Long, A.C., Akkerman, R., and Clifford, M.J. Investigation of Tool-Ply Friction of Textile Composites, 8th International Conference on Textile Composites (TEXCOMP), 16th-18th October, Nottingham, UK, 2006 [pdf]
  28. Wang, J., Harrison, P., Long, A.C. and Clifford, M.J. Prediction and Characterisation of the Shear Behaviour of Viscous Woven Textile Composites’, 8th International Conference on Flow Processes in Composite Materials (FPCM8), 11th-13th July, Douai, France, 2006 [pdf]
  29. Lin, H., Wang, J., Long, A.C., Clifford, M.J. and Harrison, P. Textile Wrinkling in Composite Forming, AUTEX World Textile Conference, 11th-14th June, Raleigh, North Carolina, USA, 2006 [pdf]
  30. Lin, H., Evans, P., Harrison, P., Wang, J., Long, A.C. and Clifford, M.J. An Experimental Investigation into the Factors Affecting the Forming Performance of Thermoset Prepreg, 9th International ESAFORM Conference on Materials Forming, 26th-28th April, Glasgow, UK, 2006 [pdf]    
  31. Wang, J., Lin, H., Long, A.C., Clifford, M.J. and Harrison, P. Predictive Modelling and Experimental Measurements of the Bending Behaviour of Viscous Textile Composites, 9th International ESAFORM Conference on Materials Forming, 26th-28th April, Glasgow, UK, 2006 [pdf]  
  32.  Long, A.C., Skordos, A., Harrison, P., Clifford, M. and Sutcliffe, M. Optimisation of Sheet Forming for Textile Composites Using Variable Peripheral Pressure, Society for the Advancement of Material and Process Engineering (SAMPE), 27th-29th March, Paris, France, 2006 [pdf]    
  33.  Harrison, P., Yu, W.R., Wang, J., Baillie, T., Long, A.C. and Clifford, M.J. Numerical Evaluation of a Rate Dependant Model for Viscous Textile Composites, 15th International Conference on Composite Materials, 27 June -1st July, Durban, South Africa, 2005 [pdf]
  34. Endruweit, A. Wong, C.C., Harrison, P. and Long, A.C. Dual Scale Modelling of Flow Through Non-Uniform Bi-Directional Fabrics, 15th International Conference on Composite Materials, 27 June -1st July, Durban, South Africa, 2005 [pdf]
  35. Long, A.C., Wiggers, J. and Harrison, P. Modelling the Effects of Blank-Holder Pressure and Material Variability on Forming of Textile Preforms, 8th International ESAFORM Conference on Materials Forming, 27th-29th April, Cluj-Napoca, Romania, 2005 [pdf]
  36. Harrison, P., Haylock, T. and Long, A.C. Measurement of the Transverse and Axial Viscosities of Continuous Fibre Reinforced Composites, 8th International ESAFORM Conference on Materials Forming, 27th-29th April, Cluj-Napoca, Romania, 2005 [pdf]
  37. Harrison, P., Tan, M.K. and Long, A.C. Kinematics of Intra-Ply Slip in Textile Composites during Bias Extension Tests, 8th International ESAFORM Conference on Materials Forming, 27th-29th April, Cluj-Napoca, Romania, 2005 [pdf]
  38. Yu, W.R., Harrison, P. and Long, A.C. Finite Element Forming Simulation of NCF Considering Natural Fibre Variability, 8th International ESAFORM Conference on Materials Forming, 27th-29th April, Cluj-Napoca, Romania , 2005 [pdf]
  39. Harrison, P., Yu, W.R. and Long, A.C. Simulation of Thermoplastic Sheet Forming Using Predictions of a Constituent-Based Energy Model, 7th International Conference on Textile Composites (TEXCOMP) 9th-11th September, Yonezawa, Japan, 2004 [pdf]     
  40. Clifford, M.J., Harrison, P. and Long, A.C. Can it be Made? Predicting the Formability of Textile Composite Components, 21st International Congress on Theoretical and Applied Mechanics, 15th-21st August, Warsaw, Poland, 2004 [pdf]
  41. Harrison, P., Yu, W.R. and Long, A.C. Simulation of Viscous Textile Composite Sheet Forming based on a Unit Cell Energy Model, 11th European Conference of Composite Materials, 31st May - 3rd June, Rhodes, Greece, 2004 [pdf]  
  42. Harrison, P., Yu, W.R., Wiggers, J. and Long, A.C. Finite Element Simulation of Fabric Forming, Incorporating Predicitons of a Meso-Mechanical Energy Model, 7th International ESAFORM Conference on Materials Forming, 28-30th April, Trondheim, Norway, 2004 [pdf]
  43. Yu, W.R., Harrison, P., and Long, A.C. Ideal Forming of Non Crimp Fabric Preform Through Optimisation of Blank Shape and Blank Holding Force, 7th International ESAFORM Conference on Materials Forming, 28-30th April, Trondheim, Norway, 2004 [pdf]
  44. Harrison, P., Wiggers, J., Long, A.C. and Rudd, C.D. A constitutive model based on meso and micro kinematics for woven and stitched dry fabrics, 14th International Conference on Composite Materials, 14-18th July, San Diego, California, USA, 2003 [pdf]
  45. Harrison, P., Clifford, M.J., Long, A.C. and Rudd, C.D. Constitutive modelling  of shear deformation for impregnated textile composites, 6th International ESAFORM Conference on Materials Forming, 28-30th April, Salerno, Italy, 847-850, 2003 [pdf]
  46. Wiggers, J., Long, A.C., Harrison, P. and Rudd, C.D. The Effects of Stitch Architecture on the Shear Compliance of Non-Crimp Fabrics, 6th International ESAFORM Conference on Materials Forming, 28-30th April, Salerno, Italy, 851-854, 2003 [pdf]
  47. Harrison, P., Clifford, M.J., Long, A.C. and Rudd, C.D. A constitutive model based on meso and micro kinematics for impregnated woven continuous fibre reinforced composites, Composites Testing and Model Identification, January 28-30th, Chalons-en-Champagne, France, 2003 [pdf]
  48. Harrison, P.,  Long A. C., Clifford M. J., Garcia Gil R., Ward I. M. and Hine P. J.  Investigation of  thermoformability and molecular structure of Curv TM, Automotive Composites and Plastics,3-4th December, Basildon, Essex, UK, 2002 [pdf]
  49. Harrison, P., Clifford, M.J. and Long, A.C., Shear Characterisation of Woven Textile Composites, 10th European Conference on Composite Materials, 3-7th June, Brugge, Belgium, 2002 [pdf]   
  50. Sutcliffe M.P.F, Sharma, S.B., Long A.C., Clifford M.J., Gil R.G., Harrison P., and Rudd, C.D. A Comparison Of Simulation Approaches For Forming Of Textile Composites, 5th International ESAFORM Conference on Materials Forming, 15-17th April, Krakow, Poland, 311-314, 2002        
  51. Long A.C., Clifford M.J., Gil R.G., Harrison P., Rudd C.D., Sharma S B, Sutcliffe M.P.F. Experimental analysis of fabric deformation during forming of textile composites. 5th International ESAFORM Conference on Materials Forming, 15-17th April, Krakow, Poland, 279-282, 2002 [pdf]  
  52. Harrison, P., Clifford, M.J., Long, A.C. and Rudd, C.D. A micro-mechanical constitutive model for continuous fibre reinforced impregnated composites, 5th International ESAFORM Conference on Materials Forming, 15-17th April, Krakow, Poland, 275-278, 2002 [pdf]
  53. Long, A.C., Clifford, M.J., Harrison, P. and Rudd, C.D. Modelling of Draping and Deformation for Textile Composites, Conference - International Conference for Manufacturing of Advanced Composites, 27-28th September, Belfast, UK, 66-76, 2001        
  54. Harrison, P., Janssen, L.J.P., Navez, V., Peters G.W.M. and Baaijens, F.P.T. Birefringence measurements on polymer melts in an axisymmetric flowcell, The Society of Rheology 72nd Annual Meeting Program and Abstracts, 5-11th  February, Hilton Head, South Carolina, USA, 13, 2001 [pdf]
  55. Harrison, P. and Navard, P., Band texture in liquid crystalline polymers, Europhysics Conference on Macromolecular Physics, Eurorheo 99-1, 3-7th May, Sophia Antipolis, France, 1999        
  56. Harrison, P., Navard, P., and Cidade, M. T., Band Texture Formation in Liquid Crystalline Polymers, 5th European Rheology Conference, September 6-11th, Portoroz, Slovenia, 1998        
  57. Harrison, P. and Navard, P., Flow Induced Structures Formed During the Shear Relaxation of Liquid Crystalline Polymers, The Society of Rheology 69th Annual Meeting Program and Abstracts, 19-23rd  October Hyatt on Capitol Square Columbus, Ohio, USA, 60, 1997        
  58. Harrison, P. and Navard, P., Rheological behavior of a liquid crystal polymer solution during its relaxation through the development of bands, GDR Rheo-physique des suspensions et colloides, 30th June - 2nd July, Strasbourg, France, 1997        
  59. Harrison, P. and Navard, P. Rheological behavior of a liquid crystal polymer solution during its relaxation through the development of bands, Reunion du reseau Cristaux Liquides, 5 - 6th June, Leuven, Belgium, 1997        

Invited Lectures

  1. Harrison, P. Manufacture, Characterisation and Modelling of Magneto-Rheological Elastomers, Invited Lecture, Shanghai Jiao Tong University, China, 9th August, 2010
  2. Harrison, P. Manufacture, Characterisation and Modelling of Magneto-Rheological Elastomers, Workshop on Shape Memory Polymers and Composites, Seoul National University, South Korea, 3-5 August, 2010
  3. Harrison, P.,  ten Thije, R., Akkerman, R., Long, A.C.  Characterisation and modelling friction at the tool-ply interface for thermoplastic woven composites. NATO Advanced Research Workshop: Use of Textile Composites Technology for Safer Vehicles. Kiev, Ukraine, 18-21 May, 2009
  4. Harrison, P., Forming of Engineering Fabrics and Textile Composites' INEGI, University of Porto, Portugal, 23rd Jan, 2009
  5. Harrison, P. Mechanics of Fabric Compliance, Workshop on Engineering Science Models for Textile Structures, Rutland Square Hotel, Nottingham, 12th-13th April, 2005      
  6. Harrison, P. Multi-Scale Modelling of Textile Composites, Proc. 2nd Int Workshop on Multi-Axial Textile Composites, 2nd April, Seoul National University, Seoul, Korea, 2004       

Technical Reports

  • Harrison, P., Long, A.C., Clifford, M.J., Design Optimisation of Textile Composites (DOTCOMP), Progress Reports 1 to 6, 2004-2005 (6 Quarterly reports)
  • Harrison, P., Gil, R.G., Long, A.C., Rudd, C.D., Clifford, M.J., Draping of Engineered Prepregs and Reinforced Thermoplastics (DEPART) Progress Reports 7 to 12, 2001-2002 (5 Quarterly reports)
  • Wiggers, J., Harrison, P., Long, A.C., Rudd, C.D. Design and Processing of Multi-Layer Structures for Liquid Composite Moulding (Multi-Comp) Progress Reports 2 and 3, 2002-2003 (2 Quarterly reports)
  • Harrison. P., Rheo-Optics Software For Heated Axisymmetric Stagnation Flowcell MT 00.016, June 2000, Technical University of Eindhoven, The Netherlands